LS PDS Supercharger Camshaft - Stock Block / Stock Head Factory Blower

Thompson Motorsports Custom Camshaft

LS PDS Supercharger Camshaft - Stock Block / Stock Head Factory Blower

5150 core
3 bolt core
Rocker ratio: 1.7
Intake lift: .595
Exhaust lift: .595
Intake duration @.050": 222
Exhaust duration @.050": 235
LSA: 120
ADV: +4

This camshaft is designed for Stock Block / Stock Head. Factory Blower

Disclaimers:

*All camshafts sold are 3 bolt non DOD and non VVT unless stated otherwise specifically on the camshaft. If you have DOD, VVT or a single bolt camshaft you will need to purchase the conversion kits or add them to the order.

**Every camshaft should be measured for piston to valve clearance. Many camshafts have been found to fit and are sold as camshafts to be used in stock head stock piston motors intended to operate without valve reliefs however it is not possible to know for sure if it will fit in your specific motor without measuring on install. It is the installers responsibility to ensure proper fitment and piston to valve clearance.

***Every install requires verification of lifter preload, Adjusting rocker arms or pushrod length is the responsibility of the installer to ensure proper length of pushrod and lifter preload.

****Every camshaft we sell will require better than stock valve springs and pushrods, We are happy to help with a kit but purchasing a camshaft alone without changing the springs on your vehicle is not recommended and will likely result in a catastrophic failure.

*****Thompson Motorsports is not responsible for damage occurring due to improper installation of your camshaft, Timing of your camshaft, improper preload, improper re sealing of the cam plate, damage to cam bearings on install or any subsequent damage occurring on installation.